MDII Plows: Full Value for Half-Ton Trucks

You don’t need a 3/4-ton truck to plow roadways, driveways and parking lots. Thanks to the SnowDogg MDII Snow Plow by Buyers Products, you can give snow the boot in a fraction of the time using only a half-ton truck! MDII truck plows pack full-size features in half the weight – and they’re even compatible with Jeeps and SUVs that aren’t plow prepped.
Durability. Versatility. Reliability. Convenience. The pride that can only come from maintaining your property using a high-quality piece of American-made equipment. The satisfaction you’ll feel after defeating winter’s worst with a Ford F-150, Ram 1500, Chevrolet Silverado 1500, GMC Sierra 1500, Nissan Titan or Toyota Tundra. Those are just some of the reasons why the MDII makes any Minnesotan’s perfect weapon against snow. But the MDII’s industry-leading features each deserve their own spotlight as well.
Floating A-frame
Helps the MDII bite closer against the pavement, contouring against it to promote the perfect scrape while minimizing uneven wear.
304 stainless steel moldboard
Hard-wearing, resistant to rust and chemical corrosion, with an amped up tensile strength of 621 MPa – the MDII is built to withstand the roughest roads (and the operator’s honest mistakes).
Laser-cut steel ribs with full-length cross tube
The MDII’s sturdy design equals maximum strength and superior stability across the entire width of the plow.
Full trip action
Dual stress-optimized trip springs protect the MDII’s honed blade against submerged curbs and other invisible obstacles.
Contoured poly snow deflector
Ices out rocks and other kicked-up debris before they can put cracks in your windshield.
Cast iron plow shoes
Keeps the MDII raised safely above gravel, loose pavers, dirt and grass while reducing wear and tear on the blade.
In-cab controller
Raise and lower the MDII from the comfort of your own cab – using only one hand.
RapidLink Attachment System
Mount or dismount your MDII in one minute or less! The RapidLink combines a drop-leg and hydraulic jack switch that make fine-tuning mount height faster and easier than ever before.
Municipal-style chain lift
Stacks high and adjusts easily, so you can get the job done right and fast.
Fully enclosed hydraulic power unit
Keeps winter weather away from sensitive mechanical equipment, with a large maintenance panel that grants the operator instant access.
MD Plow Specifications
Specs |
MD68II |
MD75II |
MD80II |
Width |
80″ |
90″ |
96″ |
Blade Height |
24″ |
24″ |
24″ |
Material |
304 SS |
304 SS |
304 SS |
Thickness |
0.075″ |
0.075″ |
0.075″ |
Angle Cylinders |
1.5″ X 10″ |
1.5″ X 10″ |
1.5″ X 10″ |
Lift Cylinder |
1.5″ X 6″ |
1.5″ X 6″ |
1.5″ X 6″ |
Kingpin Size |
1″ |
1″ |
1″ |
Width at Angle |
69.2″ |
78″ |
83″ |
Ribs |
6 |
8 |
10 |
Springs |
2 |
2 |
2 |
Trip Style |
Full |
0.375 X 6″ |
0.375 X 6″ |
Cutting Edge |
0.375 X 6″ |
0.375 X 6″ |
0.5″ X 6″ |
Weight* |
380 lb |
400 lb |
439 lb |
Deflector |
Standard |
Standard |
Standard |
Shoes |
Cast |
Cast |
Cast |
*Not including truck mount (40-80 lb) |
Are you ready to show the snow why a half-ton truck is a true force to be reckoned with? Then come visit Renegade Truck Equipment in Richmond, MN, or contact us today to learn why SnowDogg’s fine products are the best on the market. Self-reliance begins at Renegade!